• MSB SwitchboardMSB (Main Distribution Switchboard) is a kind of electrical cabinet installed right after the low voltage substations (from 15kV down to 380VAC), the major function of MSB cabinets is connect & disconnect, safety protection for electrical systems. Rated current can reach approximately 6300A.
  • CABLE LADDERSTPower - Cable ladder is also known as electric ladder, applied to install electrical wires and cables in factories, apartments, buildings ... is the bearing structure of the system.
  •  Distributor of ABB electrical equipmentProduct new: STPower - Distributors and Agents for Electrical products ABB in the central of Vietnam
  • Low & Medium Voltage Cubiele SwitchboardCubiele Switchboards which are designed and manufactured in accordance with strict quality management, high stability and secure operation has been widely used in power stations, power distribution station in power companies, industrial parks, residential quarters and factories...
  • Breakers & SwitchesBreakers & Switches are designed for flexibility and reliable performance in a wide variety of applications: power distribution for residential and industrial buildings, HVAC, water pumping stations, data centers
  • Trunking SystemCable tray (trunking) is the conduit for the installation of wires and cables in factories, apartment buildings, office buildings
  • Low & Medium Voltage Cubiele SwitchboardCubiele Switchboards which are designed and manufactured in accordance with strict quality management, high stability and secure operation has been widely used in power stations, power distribution station in power companies, industrial parks, residential quarters and factories...

MSB Switchboard

     We know how many levels of electricity transmitted from the factory must go through and eventually lower the voltage according to the standards in accordance with the needs of industrial parks and residential areas. When the grid power is low-voltage through the transformer station to 0.4kV, in order to operate the production, all must go through the low-voltage electrical cabinet, it is the power distribution connector, ensuring safety for the rear load system.

     Types of low voltage cabinets

     The low-voltage electrical cabinet system includes electrical cabinets operating at a low voltage of 0.4 kV. With the need to ensure the quality and stability of the power supply to businesses and residents, it includes low voltage distribution cabinets, low voltage compensation cabinets, and low voltage control cabinets.

     Low voltage electrical cabinets we often see very clearly at the top of the residential area right behind the transformer station.
     Low voltage cabinet complete set
     When electricity is transmitted from the power plant to the industrial or residential area, it will be lowered in voltage when passing through the substation. And soon there will be a full low voltage electrical cabinet system included
     - Low voltage compensation cabinet with the function of compensating reactive power to the grid, improving the power factor
     - Low voltage distribution cabinet with the function of distributing electricity to each zone, and protecting the transformer safety, residential area when overcurrent, overvoltage occurs.
     - All outdoor low-voltage electrical cabinet systems are mounted on the main shaft, convenient for monitoring operation.
     The equipment in the low voltage cabinet:
     In order to ensure the function of the low-voltage cabinet system, all electrical equipment in the low-voltage cabinet must have a strict quality inspection, it includes:
     - MCCB with large capacity, is calculated total according to residential areas, industrial zones, ensuring the switching and handling safely when there is an incident.
     - Copper busbars for connecting electrical equipment are assembled based on the copper busbar selection table according to the rated current. According to the copper busbar catalog, with different thicknesses and widths will withstand a certain current, must be reasonable to estimate the load arising later.
     Low voltage cabinet housing
     Characteristics of low voltage cabinets are usually installed outdoors so it should be noted in the design and processing of the cabinet:
     - Dimensions must meet the standard according to the rate and requirements of the customer, based on the drawings of the low voltage cabinet.
     - Must ensure the principle diagram of the low-voltage cabinet is easily deployed and installed, without lack of space.
     - Refer to the low voltage cabinet standards to design and process only in accordance with general regulations
     - The cabinet is convenient in the installation of low voltage cabinets in the future, as well as according to the maintenance process.
     - In addition, the outdoor industrial electrical cabinet must be designed with standard size, processed for production, charged to ensure the durability of outdoor energy.
   
 Quotation of low voltage cabinet in full
     As a leading manufacturing plant in the industrial electricity sector, undertaking thousands of projects. STPower will assist in consulting and solving customers' problems quickly. Based on the drawings or approved BOQ, we will send the full low voltage cabinet quotation as soon as possible, keep the committed construction schedule, and support customers throughout the use process. product.
     In addition, with confidence in its production capacity, STPower commits:
     Product warranty support for up to 24 months
     - Handling electrical problems 24/7 whenever the developer has a problem with the electrical system.
     - Maintenance - periodic maintenance of electrical systems for electrical cabinets STPower provided.

For more information about consulting and quotation, customers / partners please contact:

STPOWER JOINT STOCK COMPANY
Factory: ​Lot No.47, 2nd Street, Da Nang Industrial Zone, Da Nang City
Office: 02363.959.797 - Hotline: 0905.959.564
Email: info@stpower.com.vn
Website: http://stpower.com.vn/
With the motto: "Right quality - Sufficient quantity" STPower commits to produce products with quality above satisfaction.
Please contact STPower immediately to feel the most dedicated care.
Best regards!
STPower Joint Stock Company

Address: Lot No.47, 2nd Street, Da Nang Industrial Zone, Da Nang City, Viet Nam
Phone: 0905 959 564 - 0236 3959 797
Fax:
Email: info@stpower.com.vn

30th Floor, Room OT11, Landmark Plus Building, 720 Dien Bien Phu Street, Ward 22, Binh Thanh District, Ho Chi Minh City

- CT6B - Vinh Diem Trung Urban Area, Nha Trang City, Viet Nam

- 38 Tran Ke Xuong Street, Hai Chau Dist, Da Nang City, Viet Nam